Standard Equipment
Airframe and Interior
Complete reinforced 4130 "Tig" welded fuselage
Large Cabin: 72cm (28.5 inch) wide at shoulder for pilot
Front position for pilot when flying solo
Powder coated (black or grey) controls and engine mount
Reinforced engine mount
PPG two part epoxy paint
Single and large door
Two cabin fresh air vents
Right door opening during flght
Large baggage area (max 20kg / 44lbs)
Savage yellow or white paint scheme with lightning bolt (black)
Fireproof firewall
Rotax 912 UL 80hp
Custom made exaust system (stainless steel)
GT two blade wooden propeller (183cm / 70inch)
Aluminium wing covered by fabric
Two aluminium fuel tanks (total 68lt)
Fuel selector valve - gravity feed fuel system
Fuel sight gauge in wing root - fuel filter and basic drain
Easy remouvable seatings with map pocket
Four point harness - dual flight controls
Single flap lever mechanism (3 positions)
Elevator manual trim - dual pedal brakes
Adjustable seatings - wooden floorboards
Idraulic brakes - Tundra tires 8:00 x 6
Matcho steerable tailwheel
Aeronautical shock absorbers
Sealed high energy Junkers battery
Aluminium ailerons and flaps
Negative setting of flaps for better cruise speed
90 gr fabric for covering
Aeronautical standard bolts (inch)
Foldable wings for easy transport (time required: 30min)
Bushing already welded into the fuselage for float version
 
Standard Panel
Airspeed
Altimeter
Vertical speed indicator
Compass
Slip indicator
Tachometer
Hour meter
Oil pressure gauge
Oil temperature gauge
Cht
Key starter with magnetos switches
Master switch
Circuit brakers
Chocke control
Low voltage warning light
 
 
Differences between Cruiser and Classic
New cowling design
New panel housing
New instrument panel
More tilted front lexan
Different shape of landing gear
Bottom of the fuselage not flat
Different windows design
Different wing tips and ailerons
Different vertical tail design
New protection (fabric) for the rear stick
Vortex generators installed if desired
NOTE: Wings, fuselage, main constructive aspects etc. are the same for both models
 
 
Characteristics (with Rotax 912 S 100hp)
Engine ROTAX 912 S 100hp 5800 rpm
Fuel tank capacity: 68 litres (18 Gallons)
Propeller: Wooden twin blade, diameter 183 cm (72 in)
 
Dimensions
Wing span 945 cm (372 in)
Length 651 cm (256.3 in)
Height 203 cm (79.9 in)
Wing surface area 14,2 m2 (152.85 sq ft)
Wing chord 156 cm (61.4 in)
Cabin width 69 cm (27.2 in)
Undercarriage gauge 180 cm (70.9 in)
 
Weights
Max take-off weight 450 kg (992 lbs) - 560 kg (1234 lbs) [depends on the market]
Weight unloaded 291 kg (640 lbs)
Effective load capacity 159 kg (349.8 lbs) - 269 kg (591.8 lbs)
Max wing loading 450kg VERSION 32 kg/mq (6.5 lb/sqft)
Max wing loading 560kg VERSION 39 kg/mq (8 lb/sqft)
Load factor +6 - 3
 
 
Performances - Max Take-Off Weight 560 Kg
Vne 205 km/h (128 mph)
Max speed s.l. 188 km/h (117 mph)
Cruising speed 75% 170 km/h (106 mph)
Climb rate 4,8 m/s (945 ft/m)
Stall speed with full flaps 62 km/h (38 mph)
Max ceiling 4400 m (14400 ft)
Range 65% 720 km (436 mi)
Required take-off space 110 m (361 ft) [depending on the surface]
Required landing space 90 m (295 ft) [depending on the surface]
Required landing space with 15 m obstacle 190 m (623 ft) [depending on the surface]
Cross wind component (max.) 29 km/h (18 mph)
 
 
 
 

Photo Gallery
Photos
 


©2019
Website designed by Aircraftstudiodesign and developed by Intersoft